|
ENGINE MOUNTS & RELATED 2.0L SAAB 9000 1986-1998
|
|
APPLICATION
|
PART #
|
PRICE
|
Click to enlarge!
|
| 9000 1986-1990 2.0L Trans Mount AFT |
4165312 |
$ 26.00 |
Buy Now |
|
| 9000 1986-1990 2.0L Trans Mount OES |
4165312 |
$ 53.35 |
Buy Now |
| 9000 1986-1990 2.0L Trans Mount Screw Kit includes: Screw, Bracket, 2 washers & nut OES |
KT5499998 |
$ 40.65 |
Buy Now |
|
| 9000 1986-1989 2.0L Mount Hydraulic Fits Front & Rear sold individually AFT |
7551104 |
$ 70.00 |
Buy Now |
|
| 9000 1986-1989 2.0L Mount Hydraulic Fits Front & Rear OEM |
7551104 |
$ 83.00 |
Buy Now |
| 9000 1990-1990 2.0L Mount Hydraulic Fits Front & Rear sold individually AFT |
8786006 |
$ 87.00 |
Buy Now |
| 9000 1990-1990 2.0L Mount Hydraulic Fits Front & Rear sold individually OES |
8786006 |
$ 184.50 |
Buy Now |
| 9000 1986-1990 2.0L Rubber Bushing Kit SEE NOTE 1: AFT |
7576333 |
$ 22.90 |
Buy Now |
|
| 9000 1986-1990 2.0L Urethane Bushing Kit SEE NOTE 1: (2 needed to do both upper mounts) AFT |
7577554U |
$ 45.00 |
Buy Now |
|
| 9000 1986-1990 2.0L Torque Arm With Bushing OES |
7599913 |
$ 72.75 |
Buy Now |
|
| 9000 1985-1990 2.0L Torque Bracket Assembly OES |
7577554 |
$ 126.10 |
Buy Now |
|
| 9000 1986-1990 2.0L Torque Arm Mount bracket attaches to 7519919 OES |
8786071 |
$ 15.52 |
Buy Now |
|
| 9000 1986-1990 2.0L Lower Mount Bracket 7559743 OES |
7577695 |
$ 73.72 |
Buy Now |
|
| 9000 1986-1990 2.0L Torque Arm Bushing Installation TOOL OEM |
Y1040-84597 |
$ 78.90 |
Buy Now |
|
| NOTE: 9000 mount failures can be identified by noting that the engine lifts up drastically went accelerating with the brakes on. The most common mount failure is the one located below the water pump. Saab 9000 Cars came from Factory with Hydraulic Engine Mounts installed. 9000 mount failures can be identified by noting that the engine lifts up drastically went accelerating with the brakes on. The most common mount failure is the one located below the water pump but the failure of this mount often leads to the failure of all mounts. |
| NOTE: We have had several people asking the difference between the Urethane and standard Saab bushings. The basic difference between both bushings are the Factory Saab bushing is a bit more difficult to install! Both of them have equal vibration qualities. Beware of some the Urethane kits on the market that are very hard! Those kits will present more engine vibration issues. Our kits are soft urethane not hard!!! The Urethane kit # 7577554U will fit both upper engine mounts located above the alternator. This is the 3 piece bushing kit! 1 kit is needed for each upper mount and the kit includes everything needed to replace each mount. One can remove the original mount by cutting the center section out and then the sides of the original mount with a hacksaw (or similar). No specials tools are Needed to install the Urethane kits. |
| FAQ: Engine Mount Failures cause Clunking When Accelerating |
| FAQ: Engine Mount Limiter Modification |
| FAQ: Engine Mount Replacement torque Arm |
| FAQ: Engine Vibration In Drive Or Reverse |
|
ENGINE MOUNTS & RELATED 2.3L SAAB 9000 1986-1998
|
|
APPLICATION
|
PART #
|
PRICE
|
Click to enlarge!
|
| 9000 1990-1998 2.3L Engine Mount Solid Rear Toward Firewall Solid |
4165510 |
$ 85.25 |
Buy Now |
|
| 9000 1990-1998 2.3L Engine Mount Hydraulic Rear Toward Firewall AFT |
4165510 |
$ 97.17 |
Buy Now |
| 9000 1990-1998 2.3L Engine Mount Hydraulic Rear Toward Firewall OEM |
4165510 |
$ 155.05 |
Buy Now |
| 9000 1990-1998 2.3L Engine Mount Solid Front Below Water pump Solid |
4165494 |
$ 55.25 |
Buy Now |
|
| 9000 1990-1998 2.3L Engine Mount Hydraulic Front Below Water pump AFT |
4165494 |
$ 135.00 |
Buy Now |
| 9000 1990-1998 2.3L Engine Mount Hydraulic Front Below Water pump OEM |
4165494 |
$ 155.05 |
Buy Now |
| 9000 1990-1998 2.3L Trans Mount AFT |
4165312 |
$ 26.00 |
Buy Now |
|
| 9000 1990-1998 2.3L Trans Mount OES |
4165312 |
$ 53.35 |
Buy Now |
| 9000 1990-1998 2.3L Trans Mount Screw Kit includes: Screw, Bracket, 2 washers & nut AFT |
KT5499998 |
$ 40.65 |
Buy Now |
|
| 9000 1990-1998 2.3L Bushing Kit Rubber SEE NOTE 1: AFT |
7576333 |
$ 22.90 |
Buy Now |
|
| 9000 1990-1998 2.3L Bushing Kit Rubber SEE NOTE 1: AFT |
7576333 |
$ 22.90 |
Buy Now |
| 9000 1990-1998 2.3L Bushing Kit Urethane SEE NOTE 1: (2 needed to do both upper mounts) AFT |
7577554U |
$ 45.00 |
Buy Now |
|
| 9000 1990-1998 2.3L Torque Arm W/Bushing OES |
7599913 |
$ 72.75 |
Buy Now |
|
| 9000 1990-1993 2.3L Torque Bracket OES |
32026107 |
$ 124.16 |
Buy Now |
|
| 9000 1990-1998 2.3L Mount Bracket attaches to 7599913 OES |
7573413 |
$ 43.65 |
Buy Now |
|
| 9000 1990-1998 2.3L Engine Bracket OES |
30520466 |
$ 93.12 |
Buy Now |
|
| 9000 1990-1998 2.3L Torque Arm TOOL Bushing Installation OEM |
Y1040-84597 |
$ 78.90 |
Buy Now |
|
| 9000 1990-1998 2.3L Torque Bracket Match the numbers off the one off your car OES |
4358818 |
$ 111.55 |
Buy Now |
|
| NOTE: 9000 mount failures can be identified by noting that the engine lifts up drastically went accelerating with the brakes on. The most common mount failure is the one located below the water pump. Saab 9000 Cars came from Factory with Hydraulic Engine Mounts installed. 9000 mount failures can be identified by noting that the engine lifts up drastically went accelerating with the brakes on. The most common mount failure is the one located below the water pump but the failure of this mount often leads to the failure of all mounts. |
| NOTE: We have had several people asking the difference between the Urethane and standard Saab bushings. The basic difference between both bushings are the Factory Saab bushing is a bit more difficult to install! Both of them have equal vibration qualities. Beware of some the Urethane kits on the market that are very hard! Those kits will present more engine vibration issues. Our kits are soft urethane not hard!!! The Urethane kit # 7577554U will fit both upper upper engine mounts located above the alternator. This is the 3 piece bushing kit! 1 kit is needed for each upper mount and the kit includes everything needed to replace each mount. One can remove the original mount by cutting the center section out and then the sides of the original mount with a hacksaw (or similar). No specials tools are Needed to install the Urethane kits. |
| NOTE: The original mounts were Hydraulic mounts and were filled with a "Thick Viscous" substance to classify the mounts as hydraulic. The aftermarket companies that offered hydraulic no longer offer them which led us to carry the Solid mounts. These mounts are excellent quality mounts have shown no issues at all. |
| FAQ: Engine Mount Failures cause Clunking When Accelerating |
| FAQ: Engine Mount Limiter Modification |
| FAQ: Engine Mount Replacement torque Arm |
| FAQ: Engine Vibration In Drive Or Reverse |
|
ENGINE MOUNTS & RELATED V6 SAAB 9000 1986-1998
|
|
APPLICATION
|
PART #
|
PRICE
|
Click to enlarge!
|
| 9000 1991-1998 V6 Engine Mounts Solid Rear Mount Toward Firewall Solid |
4165510 |
$ 85.25 |
Buy Now |
|
| 9000 1991-1998 V6 Engine Mount Hydraulic Rear Mount Toward Firewall AFT |
4165510 |
$ 97.17 |
Buy Now |
| 9000 1991-1998 V6 Engine Mount Hydraulic Rear Mount Toward Firewall OEM |
4165510 |
$ 155.05 |
Buy Now |
| 9000 1994-1997 V6 Engine Mount Solid Front Below Water pump Solid |
4165494 |
$ 55.25 |
Buy Now |
|
| 9000 1994-1997 V6 Engine Mount Solid Front Below Water pump AFT |
4165494 |
$ 135.00 |
Buy Now |
| 9000 1994-1997 V6 Engine Mount Hydraulic Front Below Water pump OEM |
4165494 |
$ 155.05 |
Buy Now |
| 9000 1994-1997 V6 Engine Mount Bushing Kit URETHANE to replace bracket bushings (2 needed to do both upper mounts) AFT |
7577554U |
$ 45.00 |
Buy Now |
|
| 9000 1994-1997 V6 Torque Arm With Bushing OES |
4165478 |
$ 83.42 |
Buy Now |
|
| 9000 1986-1990 V6 Torque Arm TOOL Bushing Installation OEM |
Y1040-84597 |
$ 78.90 |
Buy Now |
|
| 9000 1994-1997 V6 Engine Vertical Mount Bracket to timing cover OES |
4358313 |
$ 142.59 |
Buy Now |
|
| NOTE: 9000 mount failures can be identified by noting that the engine lifts up drastically went accelerating with the brakes on. The most common mount failure is the one located below the water pump. Saab 9000 Cars came from Factory with Hydraulic Engine Mounts installed. 9000 mount failures can be identified by noting that the engine lifts up drastically went accelerating with the brakes on. The most common mount failure is the one located below the water pump but the failure of this mount often leads to the failure of all mounts. (does not apply to V6) |
| NOTE: The original mounts were Hydraulic mounts and were filled with a "Thick Viscous" substance to classify the mounts as hydraulic. The aftermarket companies that offered hydraulic no longer offer them which led us to carry the Solid mounts. These mounts are excellent quality mounts have shown no issues at all. |
| FAQ: Engine Mount Limiter Modification |
| FAQ: Engine Vibration In Drive Or Reverse |
