[9000]
| STEP 2 | Remove the false bulkhead Cover 8 screws and lift of the cover to expose the clutch master and line (cars up to 1990) |
| STEP 3 | Remove the lines to the back of the clutch master under the hood. On cars later than 1990 the lines are inside the car and can be disconnected from the pedal area instead of under the hood |
| STEP 4 | Remove the clip that attaches the master to the pedal |
| STEP 6 | Remove the two 13mm bolts that hold the master to the car |
| STEP 7 | Remove the clutch master |
| STEP 8 | Refit in reverse being careful to bleed the system correctly. You may have to use a pressure bleeder or similiar to get the air bubble out at the line connection to the master |
Pricing for Clutch Master Cylinder (Clutch & Related) |
