[93 98-03]
| STEP 1 | Raise the car & Remove both spoiler skirts. |
| STEP 2 | Remove the wing liners from the rear of the bumpers & lower the car |
| STEP 3 | Open the Hood & Remove the grille |
| STEP 4 | Move the headlamp wiper arms away from the headlamps and disconnect the washer hose Clips that hold the hose |
| STEP 5 | Remove the right and left headlamps and turn signals |
| STEP 6 | Remove the two bolts securing the bumper to the car body |
| STEP 7 | Cut the cable ties that hold fog light wiring and unplug their connectors. |
| STEP 8 | Unplug the temperature sensor connector located in the middle of the bumper. |
| STEP 9 | The sensor cable is held in place on the inside of the bumper by means of insulating tape. |
| STEP 10 | Lift the bumper away by pulling it forward so that it comes free from the brackets in wing and front. |
| STEP 11 | When replacing your bumper transfer the spoiler and number plate as well as the spoiler skirts to the new bumper |
Pricing for Bumper Components Front (Body External) |
