REAR WHEEL HUB REMOVAL

Rear Wheel Hub/bearing removal

STEP 1

Lift up the car & remove the rear wheel

STEP 2

Remove the caliper retaining spring

STEP 3

Remove the allen bolt covers that hold the caliper on & remove the bolts

STEP 4

Suspend the caliper with the brake pipe hook. Be careful not to damage the line

STEP 5

Make sure the brake pipe is not damaged

STEP 6

Remove the outer brake pad

STEP 7

Remove the brake caliper holder

STEP 8

Remove the brake disc

STEP 9

Remove the wheel sensor connector

STEP 10

Remove the hub and the brake shield

STEP 11

Refit in Reverse Tightening torque for new nut is 50 Nm +300 (40 ft lb +30 degrees) & 7 ft lb for the sensor